Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterLiftMaster Torsion Spring Replacement: The Keller Owner’s Guide
If your LiftMaster garage door snapped a torsion spring, you’re looking at an installed replacement cost of $180-$340 in Keller. We stock LiftMaster-compatible torsion springs on the truck and can usually have your door running the same day you call. You’ll know it failed when you hear a sound like a firecracker going off inside the garage, and the door won’t lift more than a few inches even though the opener is running.
Most Keller homeowners discover the spring failed at the worst possible moment: trying to leave for work, or just after pulling in for the night. The opener strains, the door jerks up a few inches, and then everything stops. That’s not an opener problem. That’s a spring problem, and we’ll get to why in a minute.
Which LiftMaster Models This Applies To
The torsion spring on a LiftMaster door isn’t actually made by LiftMaster. LiftMaster makes openers, and the spring is matched to the door’s weight and size, not the opener brand. But when you have a LiftMaster opener paired with a standard residential sectional door in Keller, the spring assembly above the door is what we’re replacing.
Here’s a gotcha most people don’t know: the spring’s wire size, inside diameter, length, and wind direction are determined by the door’s exact weight and height. A 16×7 steel door takes a different spring than a 16×7 insulated wood composite door, even if they look identical at a glance. We count spring cycles the way you count tire miles, and the label on your old spring tells us a lot. If that label is faded or gone, we measure the wire gauge, coil count, and inside diameter on site. We carry OEM-equivalent LiftMaster-compatible springs in the most common Keller sizes, and we’ll tell you if a quality aftermarket spring is a better value for your door. LiftMaster springs are wound to the same standards as Chamberlain and Genie equivalents, but matching the specs is what keeps your door balanced and your opener alive.
Signs Your LiftMaster Torsion Spring Is Failing
- Loud bang from the garage. That’s the spring snapping under tension. It sounds like a gunshot or a two-by-four hitting concrete, and once it happens the spring is done. The door will not lift by hand or opener.
- The door is suddenly heavy to lift manually. A working torsion spring counterbalances the door’s full weight. If you pull the emergency release and the door feels like it weighs 150 pounds, the spring has lost tension or is nearing failure.
- The opener works but the door barely moves. Your LiftMaster opener is pushing against a door it can’t lift. That strain burns out gears and circuit boards fast. If the opener is straining, the problem is almost never the opener.
- A visible gap in the spring coil. Walk to the center of the garage and look up at the spring tube. If you see a two-inch separation in the coil, the spring is broken and must come out before the door can be used safely.
- The door opens crooked or jams halfway. One spring carries the left side, the other carries the right on a two-spring door. If one side sags or the door hangs uneven, one spring has failed and the other is about to follow.
Replacement Cost & What’s Included
Spring repair in Keller runs $180-$340 installed, depending on whether you have a single or double spring setup and the spring’s specs. A basic single-spring replacement starts around $180. Dual-spring systems, which most newer doors have, run $250-$340 because the labor is the same but the materials cost more. The price we quote on the phone is the price you pay when the job is done. No last-minute add-ons, no “I had to upgrade the part” story.
That price includes the spring itself, the winding and unwinding labor, rebalancing the door, and lubricating the rollers and hinges before we put the opener back to work. We also check the cables, drums, and center bearing while we’re in there, because a broken spring often leaves the cables loose and ready to tangle. Every LiftMaster torsion spring replacement we do in Keller carries our 90-Day Done Right Promise in writing: if it’s not done right, we make it right. One call brings Otto back, no runaround.
DIY or Call Us?
Let us be straight with you: a torsion spring is the one garage door part we tell people not to touch. These springs are wound under 100 to 200 pounds of torque, and when they unload on you, the winding bar becomes a projectile. We’ve repaired doors where a homeowner tried to save $200 and spent the afternoon in urgent care. A door is 200 pounds riding on two springs. Respect it.
What you can safely do is unplug the opener, leave the door down, and call (817) 241-0932. We answer live, 24/7, and Otto quotes the job on that call and holds the number when he gets there. If the door is stuck open with a vehicle inside, we make it a priority. Keller to Fort Worth to Southlake, we’ve fixed these long enough to know the fastest route to your street.
FAQs
A standard LiftMaster-compatible torsion spring is rated for about 10,000 cycles, which works out to roughly 7 to 10 years for most Keller homeowners. In Texas, heat and humidity shorten that window, especially in garages that face west and bake all afternoon. We’ll count what’s left on yours and tell you before it surprises you.
No. A snapped torsion spring cannot be welded, spliced, or re-bent. The steel has reached its fatigue limit, and any repair attempt risks the door falling and also damages the other spring, cables, and opener. Replacement is the only safe and lasting fix. Call (817) 241-0932 for an exact quote based on your door size, and we’ll have the right spring on the truck.
Most LiftMaster torsion spring replacements in Keller take 45 to 90 minutes, start to finish. That includes unwinding the old spring, installing and winding the new one, rebalancing the door, and lubricating the moving parts. If we find cable damage from the snap, add about 20 minutes and we’ll show you before we touch it.
Yes. We carry the most common spring sizes Keller doors need, including single and double spring configurations. If your door needs a less common size, we source it same day from our Texas supplier and get you back on schedule fast. Tell me what it’s doing and I’ll tell you what it needs, no guessing, no upsell.
Call Otto’s Garage Door for LiftMaster Torsion Spring Replacement in Keller
We’re the local shop with a published address and a license number you can verify before the truck rolls. The name on the van is Otto Reinhardt, same as the invoice. Call (817) 241-0932 for a free estimate on your LiftMaster spring replacement, a straight answer on pricing, and someone who answers the phone at nine at night when your door won’t open. We serve Keller, Bloomfield Hills, and the surrounding county, and we’ve been doing it since 2004. Senior and veteran discounts always apply, and we’ll give you a free second opinion on any written estimate, no trip charge inside the county.
Written by Otto Reinhardt, Owner, Otto’s Garage Door - Keller, TX at Otto’s Garage Door, serving Keller and nearby areas.